Foster City, California
Oven Repair in Foster City
Find a local oven repair specialist in Foster City, whether it's a gas igniter, a heating element, or a control board giving you trouble.
- One local specialistNot a call center or a lead auction
- We never sell your dataShared only with your matched specialist
- Free to get matchedThe specialist explains any cost before any work
How it works
- Step 1
Tell us what broke
Answer a few quick questions about your appliance and your ZIP code. Takes about a minute, no account needed.
- Step 2
We match you with one local specialist
We send your request to a single independent specialist who covers your area and handles your appliance. Not a call center, not a bidding war.
- Step 3
They reach out to schedule
The specialist contacts you directly, usually within about 15 minutes during business hours, to confirm details and book a visit. Getting matched is free, and they explain any cost before starting.
Oven repair in Foster City
Foster City's housing stock skews toward condos and townhomes built in the 1970s through the 1990s, and a lot of the ovens in Sea Colony and Marina Point are on the older end. That's not a problem by itself. Older ranges and wall ovens are often worth repairing, especially if the cabinet cutout or gas connection is already in place and a replacement would mean a full renovation. The specialists we connect you with know this housing type well and can tell you quickly whether a repair makes financial sense.
The most common oven calls in this area involve igniter failure on gas models, control board issues on mid-2000s electric ranges, and temperature problems where the oven runs 50 or 75 degrees off from the set point. That last one tends to get ignored for months because food still cooks, just badly. A faulty temperature sensor usually runs $100 to $200 to fix, parts included, and the difference in your cooking is immediate.
Control board replacements are trickier. On older units, the board itself can cost $150 to $300, and if the oven is already 18 or 20 years old, it's worth having an honest conversation about whether that money goes toward the repair or toward a new appliance. The specialists we match you with won't push you either way. They'll give you the repair cost, an honest read on the unit's remaining life, and let you decide.
If you're in Treasure Isle or Harbor Side and dealing with an oven that just stopped heating entirely, that's often the igniter or the bake element, both of which are straightforward repairs. Most run $120 to $250 and can be done in a single visit.
Not sure how bad it is?
Add a photo and tell us what's happening — we'll give you a quick read on whether it's likely a simple fix or worth a specialist. It's a free guide, not an on-site diagnosis. APN is a free matching service; any repair or diagnostic pricing is set by the independent specialist.
Want the full tool with more photos? Open the appliance checker.
Common problems we hear about
- A gas oven in a Marina Point townhome stops lighting entirely. The igniter glows but the burner never catches. Left alone, the oven is completely unusable, and the underlying igniter failure can sometimes stress the gas valve over time.
- An electric range in a Sea Colony condo heats unevenly, burning the back of every baking sheet while the front stays pale. The temperature sensor is likely off or failing. Over months this makes the oven unreliable for anything beyond basic reheating.
- A mid-2000s wall oven throws an error code and won't enter any cook mode. The control board has likely failed. Without repair, the oven is a permanent fixture that does nothing, and replacement often requires cabinet modifications that cost more than the board itself.
Frequently asked questions
How do I know if my oven is worth repairing or should just be replaced?
A rough rule: if the repair costs less than half what a comparable new unit would run, and the oven is under 15 years old, repair usually makes sense. For older units, it depends on the specific failure. A $130 igniter fix on a 20-year-old gas range is often still worth it. A $300 control board on the same range is a harder call. The specialists we connect you with can walk you through it honestly.
What does oven repair typically cost in Foster City?
Igniter replacements on gas ovens usually run $120 to $200. Bake or broil element replacements on electric models are similar. Temperature sensor swaps tend to fall in the $100 to $180 range. Control board jobs are the most variable, anywhere from $180 to $400 depending on the board and the model. You'll get a firm estimate before any work starts.
My oven heats but the temperature seems way off. Is that a hard fix?
Usually not. A temperature sensor that's reading wrong is one of the more straightforward repairs on most oven models. A specialist can test the sensor in place and confirm whether it's the culprit. If it is, the part is inexpensive and the swap is quick.
How long does a typical oven repair take?
Most single-component repairs, an igniter, a heating element, a sensor, get done in one visit that runs an hour or two. Control board jobs sometimes require ordering a part, which can add a few days if it's not in stock locally.
Do the specialists work on both gas and electric ovens?
Yes. The network includes specialists with experience on gas ranges, electric ranges, and built-in wall ovens across most major brands. When you submit your request, include the fuel type and the brand if you know it, that helps match you with the right person faster.
What repairs typically cost
Specialists set their own prices, so we can't quote an exact figure up front. As a rough guide for refrigerator work in this area:
- Most refrigerator repairs
- $150–$400
- Diagnostic / service-call fee
- $89–$129
Getting matched is free. The specialist sets and confirms any diagnostic or repair pricing before starting, so you decide before any work. Ask about a 10% discount when you book through our form.