Sunnyvale, California
Stove Repair in Sunnyvale
Connecting Sunnyvale homeowners with local specialists who repair gas and electric stoves, from ignition problems to element failures.
- One local specialistNot a call center or a lead auction
- We never sell your dataShared only with your matched specialist
- Free to get matchedThe specialist explains any cost before any work
How it works
- Step 1
Tell us what broke
Answer a few quick questions about your appliance and your ZIP code. Takes about a minute, no account needed.
- Step 2
We match you with one local specialist
We send your request to a single independent specialist who covers your area and handles your appliance. Not a call center, not a bidding war.
- Step 3
They reach out to schedule
The specialist contacts you directly, usually within about 15 minutes during business hours, to confirm details and book a visit. Getting matched is free, and they explain any cost before starting.
Stove repair in Sunnyvale
Sunnyvale runs a pretty even mix of gas and electric stoves, and the split often comes down to when the house was built. Homes in Heritage District and around Ortega Park that date from the 1970s and 80s are more likely to have gas lines already run to the kitchen, while newer construction in Cherry Chase tends to go electric or induction. Knowing which setup you have matters, because the failure modes are completely different and so are the repair costs.
On gas stoves, the two most common calls are a burner that won't light and an igniter that keeps clicking even after the flame catches. The clicking one is annoying but usually a cheap fix, often a wet or cracked igniter cap that just needs to dry out or swap. A burner that won't light at all is more likely a clogged orifice or a faulty ignition module. Most ignition module jobs run $120 to $200 in parts and labor, depending on the brand.
Electric stoves have their own set of headaches. A surface element that stopped heating is often a burned-out element or a bad infinite switch, the control that regulates the heat level. Elements themselves are usually $20 to $50 in parts, but if the switch is gone too, you're looking at closer to $150 to $250 total. Specialists in our network can usually tell within the first visit whether it's worth repairing or whether the stove is old enough that replacement makes more financial sense.
If your stove is under 12 years old and the failure is isolated to one burner or one component, repair almost always pencils out. Past 15 years, especially on lower-end brands, it's worth having an honest conversation about the numbers before committing to a fix.
Not sure how bad it is?
Add a photo and tell us what's happening — we'll give you a quick read on whether it's likely a simple fix or worth a specialist. It's a free guide, not an on-site diagnosis. APN is a free matching service; any repair or diagnostic pricing is set by the independent specialist.
Want the full tool with more photos? Open the appliance checker.
Common problems we hear about
- A gas stove in a Heritage District home has one burner that sparks constantly but never ignites. Left alone, the repeated sparking can wear out the ignition module faster and run up your electricity bill since the igniter draws power continuously.
- An electric stove in Cherry Chase has a front-left element that heats weakly and inconsistently. If the infinite switch behind it is also failing, continuing to use it can overheat the wiring harness and turn a $150 repair into a more involved job.
- A gas range in Ortega Park lights fine but the flame cuts out after a few seconds. This is often a thermocouple or flame sensor issue, and using the stove by holding the knob down manually is a workaround that can eventually damage the valve seat.
Frequently asked questions
How do I know if my stove is worth repairing or should just be replaced?
A rough rule: if the repair cost is less than half what a comparable new stove would run, repair usually makes sense. On a stove under 10 years old, that threshold almost always favors repair. On something 15 years or older with multiple issues, the math starts to shift toward replacement.
My gas burner clicks constantly even when I'm not trying to light it. Is that urgent?
Not an emergency, but annoying and worth fixing soon. Constant clicking usually means a wet igniter cap or a cracked one. Drying it out sometimes solves it. If the clicking continues after the stove is fully dry, a specialist can replace the igniter cap or switch for a modest cost, typically under $100.
Can a specialist come out just to diagnose the problem, or do I have to commit to a repair?
The specialists we connect homeowners with typically charge a diagnostic fee, often $60 to $90, which tells you what's wrong and what repair would cost. You're not obligated to proceed. Some apply the diagnostic fee toward the repair if you move forward.
My electric stove element works but takes forever to heat up. Is that a repair or just how it is?
Slow heating on an element that used to be faster usually points to the element itself starting to fail or a weak infinite switch. A specialist can test both in about 20 minutes and give you a straight answer.
How long does a typical stove repair take?
Most single-component repairs, a burner swap, an igniter replacement, or an element change, get done in one visit under two hours. If a part needs to be ordered, you're usually looking at a few days between the diagnostic visit and the follow-up.
What repairs typically cost
Specialists set their own prices, so we can't quote an exact figure up front. As a rough guide for refrigerator work in this area:
- Most refrigerator repairs
- $150–$400
- Diagnostic / service-call fee
- $89–$129
Getting matched is free. The specialist sets and confirms any diagnostic or repair pricing before starting, so you decide before any work. Ask about a 10% discount when you book through our form.